List Of How To Change Hdmi Port On Ps4 Ideas. This cable from master traders is similar to the original playstation 4 cable and gets two hdmi ports for easy connectivity. After that you’d want to remove solder from the pads.
You will probably spend more on tools than. If it is plugged in correctly and the issue persists, try using a different hdmi cable. Make sure the hdmi cable and the ps5 have a proper connection.
If You’re Using A Cable Box Or Other Device, Make Sure It’s Turned On And That The Input Source Is Set To The Correct Hdmi Port.
A loose wire is due to the missing pins, and there’s no good solution other. Make sure the hdmi cable and the ps5 have a proper connection. So we'll assume that you've tested the cable with a different device, and found it works perfectly.
You Will Probably Spend More On Tools Than.
You can find the hdmi port on the upper center at the back of your ps4. You will need a hot air station that can reach at least 450c go over the old solder with leaded solder and then heat it with the hot air until the solder melts and remove the port. I would recommend using a heat gun lowes, home depot, or even harbor freight.
Use A Hot Air Gun To Melt The Solder On The Pins.
Remove the outer housing of the tv. If that isn’t possible, you would want to remove the solder from the anchor points, which are the four points on the sides of the port that connect to the board. If your hdmi port is not working on your ps4, there are a few things you can try before taking it to a technician.
It Usually Looks Like A Half Of An Octagon.
Unplug the television and set it on a flat work surface. Here’s how you’re going to do that: The most obvious sign is if any of the pins are bent or snapped.
After That You’d Want To Remove Solder From The Pads.
Repeat the steps from above for the other 3 large pins of the hdmi connector. If you see any signs of cut or slash, then that could be the underlying cause. (try the same cable as well to identify the culprit) try reconnecting the hdmi cable to your playstation.