Cool How To Light A Pilot Light On A Furnace 2022. Wait at least 5 minutes to allow any remaining gas in the air to dissipate. This step is extremely important to prevent the risk of fire.
If your furnace pilot light goes out, it doesn't always mean a costly repair. In principle, lighting a furnace pilot light is not terribly complicated. Turn the control knob to “pilot”.
Place The Lit Match Or Ignited Lighter Tip At The Pilot While Depressing And Holding The Reset Button Or Depressing The Knob, As Appropriate.
Turn off the thermostat, remove a few panels to locate the pilot light, light it a. The next step is to look for the pilot light dial. Turn the control knob to “pilot”.
Turn The Pilot Switch To The “Off” Position.
Then, hold down the “reset” button, bringing the flame of a long lighter close to the pilot light opening. Turning the control knob to “pilot” does just that. The control should be near the bottom of your furnace, and it will probably look like a dial.
While Holding The Down The Reset Button, Light A Match Or Lighter And Hold It Near The Opening Of.
Follow the pipe where the gas is coming out from. When the pilot light is hot enough and working correctly, the main gas valve in the pilot assembly is kept open by what’s called a thermocouple. Hold down the reset button and light the pilot.
While Waiting, Locate Where The Burner Should Be Lit.
Wait for 10 minutes for the furnace to fully shout down. Once you’ve found it, you’ll notice that it has several settings, usually marked “on,” “off” and “pilot.”. How to light a furnace pilot light.
After Locating The Pilot Light, It’s Time To Turn On The Switch.
The controls on older furnaces tend to wear out. Turn off the furnace’s gas valve. Most furnaces, including gas furnaces, use pilot lights.