+26 How To Light Pilot Light On Water Heater With Igniter Ideas. You should hold down the gas knob for a minute to ignite the flame. Some water heaters have a red or black igniting button, and others.
Light the pilot on older model gas water heater. Now press down and hold the gas knob releasing gas so you can light the flame. A pilot light is a small flame present to ignite the gas burner on your water heater.
You Will Usually Turn The Dial To Pilot And Hold Down The Button.
You should hold down the gas knob for a minute to ignite the flame. Continue to press and hold down the pilot button: Now press down and hold the gas knob releasing gas so you can light the flame.
Depress The Gas Control Knob.
Continue holding the pilot button down for 60 seconds to ensure the flame stays lit. Lighting a hot surface ignition: If your water heater has a separate button for the pilot setting, press it.
Keep The Knob Pushed In While Clicking The Button Over And Over Again.
Light the pilot on older model gas water heater. Occasionally, the pilot light on your a.o. Some water heaters have a separate button for pilot mode, usually a red one, which you’ll press and hold.
You Should Visibly See A Spark Or A Small Blue Flame.
Press and hold down the button. Make contact with the pilot burner with the lighter flame. Right after a second, press the ignition button till the status light begins to blink every few seconds.
Some Water Heaters Have A Red Or Black Igniting Button, And Others.
Look for a label on your gas. Here are some instructions on how to do so. Dial or rotate the gas control knob to the pilot position.